- 19 Gulmohar, 2420, Camp, Pune
- info@kankoopaints.com
- 020-26346180
Products
- Home
- Products
Our Products
Explore Our Range of Paints and Coatings
- Two Pack Polyurethane Finishes
- Two Pack Epoxy finishes
- Two Pack Epoxy finishes
- Synthetic. Q.D. Enamels
- Synthetic Enamels Exterior IS 2932
- Stoving Enamels (Industrial Grade)
- Synthetic Stoving Enamels (A/D cum Stoving)
- Two Pack Polyurethane Finishes (Auto)
- Acrylic Auto Finish
- Stoving Enamels (Auto finishes)
- NC paints
- Polyurethane Sealers / Top Coats (Glossy & Matt.)
- Epoxy coating for barrels
- Sealing Compound for barrels
- Chlorinated rubber paint
- Lead-free Synthetic enamel/Primer
- Lead-free NC Paints
- Two Pack Epoxy Primers: Zn. Phosphate / Zn. Chromate /Red Oxide Zinc Chrome
- Synthetic Primer: Zn. Chromate / Zn. Phosphate / Red Oxide Zinc Chrome
- N. C. Primers
- Etch Primer (Yellow)
- Quick Drying Base coat (ABS)
- Quick Drying Top coat (ABS)
- Quick Drying FC Base coat
- NC Sanding Sealer for wood
- NC lacquer Top Coat for wood
- Wood Stainers
- PU Top coat for wood
- Synthetic Thinner
- Stoving Thinner
- Special Cleaning Thinner
- NC Thinner
- PU Thinner
- Epoxy Thinner
- Thinner for various APC
- Two Pack Polyurethane Finishes
- Two Pack Epoxy finishes
- Two Pack Epoxy finishes
- Synthetic. Q.D. Enamels
- Synthetic Enamels Exterior IS 2932
- Stoving Enamels (Industrial Grade)
- Synthetic Stoving Enamels (A/D cum Stoving)
- Two Pack Polyurethane Finishes (Auto)
- Acrylic Auto Finish
- Stoving Enamels (Auto finishes)
- NC paints
- Polyurethane Sealers / Top Coats (Glossy & Matt.)
- Epoxy coating for barrels
- Sealing Compound for barrels
- Chlorinated rubber paint
- Lead-free Synthetic enamel/Primer
- Lead-free NC Paints
- Two Pack Epoxy Primers: Zn. Phosphate / Zn. Chromate /Red Oxide Zinc Chrome
- Synthetic Primer: Zn. Chromate / Zn. Phosphate / Red Oxide Zinc Chrome
- N. C. Primers
- Etch Primer (Yellow)
- Quick Drying Base coat (ABS)
- Quick Drying Top coat (ABS)
- Quick Drying FC Base coat
- NC Sanding Sealer for wood
- NC lacquer Top Coat for wood
- Wood Stainers
- PU Top coat for wood
- Synthetic Thinner
- Stoving Thinner
- Special Cleaning Thinner
- NC Thinner
- PU Thinner
- Epoxy Thinner
- Thinner for various APC
Customize The Product
Over the years, Kankoo Paints has experienced immense growth and transformation. One of the fundamental elements of our success is our product customization. A no-compromise policy has been integral as far as the quality of the product is concerned. We serve to stay specific to your demands.
Manufacturing Process
In this process, the required amount of pigment is charged in the Attritor/Ball Mill with the suitable quantity of resin and solvent along with dispersing, wetting, and anti-settling additives. The pigment particles are crushed within 2 steatite balls of 8 mm size by shearing action or in 37 to 50 mm pebbles in a ball mill. The time of dispersion in the attritor is 3 hours & and 16 hours overnight in the ball mill.
The material in the machine is known as Mil Base where the soft pigment takes less time compared to hard pigment.
Once the finish reaches 5+ the mill base is discharged in an open mouth barrel. Here the instrument used to check the finish is known as the Hegman Guage.
It is the 2nd step after dispersion. The remainder of resin as per formulation is added in the thinning tank along with the mill base if the batch size is 100 Ltr – 200 Ltrs it is mixed with Hand Stirrer and if the batch size is 500 Ltrs/1000Ltrs/1500Ltrs/3000Ltrs/7500Ltrs/15000 Ltrs the mill base is added in the required thinning tank of different capacity.
After the addition of resin the mill base is further thinned as per formulation with solvents which are generally Mineral Turpentine. The addition of other additives such as driers, cobalt, lead, manganese, and calcium is done during the thinning stage, and viscosity / Gloss is adjusted.
The formulation is completed up to 80 to 90% depending upon the closeness of shade. The tinter applies the panel with the previous standard batch and compares the Gloss, hiding, and shade, of the material.
The paint is filtered through fine muslin cloth in an open tank, having a tap or cock at the bottom. The material is packed in 20 ltr M.S. drums which are already cleaned, painted, and screened earlier with details such as type of paint, customers, name Batch Number, etc. The material is packed by weight after multiplying 20 ltr with wt/per ltr of paint. The drums are sealed with an inner M.S. Plug and the outer Tin Capseal is put in for further protection. The finished goods are then stored in the warehouse (Bonded store room)